Category Archives: Static Routing

this category in include Static routing

How to configure static routing with 5 Router in Cisco Packet tracer

hello guys today we will learn how to configure static routing with 5 router .Its a very simple method before we take 5 router and four  4 Pc then we will connected with Serial wire like this Screen short

Static routing

 We will provide ip address every pc 

pc 0= ip address is 4.0.0.2 and default getaway 4.0.0.1

pc 1= ip address is 1.0.0.2 and default getaway 1.0.0.1

pc 2= ip address is 2.0.0.2 and default getaway 2.0.0.1

pc 0= ip address is 3.0.0.2 and default getaway 3.0.0.1

Continue reading

Advertisements

How to configure static routing in Cisco packet tracer

hello guys today we will learn how to configure static routing  in Cisco packet tracer

ststic routing

step 1 go to router 0 CLI mode and jus type 

Router>en

Router#config t

Router(config)#int Fa0/1

Router(config-if)#ip address 1.0.0.1 255.0.0.0

Router(config-if)#no shut

Router(config)#int fa0/0                                                                                                                             Router(config-if)#ip address 2.0.0.1 255.0.0.0

Router(config-if)#no shut

step 2 Here we configure our pc 0 ip address  1.0.0.2 and default gateway 1.0.0.1

ststic routing

Step 2 then we will go to Router 1 and configure its ip address

Router>en

Router#config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int Fa0/1

Router(config-if)#ip address 3.0.0.1 255.0.0.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int Fa0/0

Router(config-if)#ip address 2.0.0.2 255.0.0.0

Router(config-if)#no shut

Step 3 then go pc 1 and here also configure ip address 3.0.0.2 and default Gateay 3.0.0.1

ststic routing

Step 4 then we will go to router 0 again and configure static routing 

Router(config-if)#exit

Router(config)#ip route 3.0.0.0 255.0.0.0 2.0.0.2

Step 5 then we will go to Router 1 and configure static routing 

Router(config)#ip route 1.0.0.0 255.0.0.0 2.0.0.1

Router(config)#exit

if you want to Cisco router labso Please click my link and download

Thank you

by vishnu sharma