Category Archives: rip routing

How to configure RIP Routing in Cisco Packet tracer

hello guys today we will learn how to configure RiP(Routing Information protocol ) Routing in cisco packet tracer its a very simple process you just fillow my step

Rip routing

Step1.  before we will take three router and three pc and we assign ip address According chart   

PC0 1.0.0.2 default geteway 1.0.0.1
PC1 3.0.0.2 default geteway 3.0.0.1
PC2 5.0.0.2 default geteway 5.0.0.1
/Router/all Router port Se/0/0/0 Se/0/1/1 Fa0/0
ROUTER0 2.0.0.1 —– 1.0.0.1
ROUTER1 2.0.0.2 4.0.0.1 3.0.0.1
ROUTER2 ——- 4.0.0.2 5.0.0.1

Step2 we will go in Router 0 CLI mod and congigure ip address like this

Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int Fa0/0
Router(config-if)#ip address 1.0.0.1 255.0.0.0
Router(config-if)#no shut                                                                                                     Router(config-if)#exit
Router(config)#int Se0/0/0
Router(config-if)#ip address 2.0.0.1 255.0.0.0
Router(config-if)#no shut

Step2  now we will go Router1 CLI mod and configure io address

Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int Fa0/0
Router(config-if)#ip address 3.0.0.1 255.0.0.0
Router(config-if)#no shut
Router(config)#exit
Router(config)#int Se0/0/0
Router(config-if)#ip address 2.0.0.2 255.0.0.0
Router(config-if)#no shut
Router(config)#exit
Router(config)#int Se0/1/1
Router(config-if)#ip address 4.0.0.1 255.0.0.0
Router(config-if)#no shut

Srep3 and now we will configure ip address in router2

Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int Fa0/0
Router(config-if)#ip address 5.0.0.1 255.0.0.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int Se0/1/1
Router(config-if)#ip address 4.0.0.2 255.0.0.0
Router(config-if)#no shut

Step 4 After ip address configuration we will configure each router in ip RIP routing like this

Router o

Router(config)#router rip
Router(config-router)#network 1.0.0.0
Router(config-router)#network 2.0.0.0

Router 1

Router(config)#router rip
Router(config-router)#network 2.0.0.0
Router(config-router)#network 3.0.0.0
Router(config-router)#network 4.0.0.0

Router 2

Router(config)#router rip
Router(config-router)#network 5.0.0.0
Router(config-router)#network 4.0.0.0

if you have problem in this rip routing so comment here i will solve your problem. you can also download rip routing lab through this link

thank you

by Vishnu  Sharma

Advertisements